****************************** INSTALL.TXT ******************************* * TAYLORED SOFTWARE'S * * * * VBZAPPER WINDOWS DUPLICATE FILE LOCATOR AND MANAGER PROGRAM * * * * UNREGISTERED VERSION 1.10.05.21 * * * * FOR MICROSOFT'S WINDOWS 3.1 * * M A Y 9 5 * ****************************************************************************** TAYLORED SOFTWARE'S VBZAPPER FOR WINDOWS 3.1. ********************************************* 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 VBZAPPER IS SYNONYMOUS WITH THE [ VERY BEST ZAPPER ] FOR WINDOWS 3.1 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 ****** VERY IMPORTANT NOTES CONCERNING YOUR VBZAPPER PROGRAM ****** NOTE YOU MUST INITIALIZE THE PROGRAMS FILES ON YOUR COMPUTER'S C:\ HARD DRIVE BUT WHEN THE SETUP PORTION OF THE PROGRAM IS LOADED YOU MAY INSTALL THE PROGRAM TO ANY OF THE HARD DRIVES THAT YOUR COMPUTER SUPPORTS 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 PLEASE BE VERY SURE THAT WHEN THE INSTALLATION IS COMPLETED THAT YOU MAKE A COPY OF THE MASTER DISKETTE AFTER THE INSTALLATION IS FULLY COMPLETED. IF YOU ARE NOT FAMILIAR WITH HOW TO MAKE BACKUP DISKETTES SEE HOW TO MAKE A BACKUP COPY BY REVIEWING THIS NEAR THE END OF THIS TEXT FILE. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 PLEASE NOTE THAT THE REASON FOR THIS IS THAT THE FILE STRUCTURES WILL BE MODIFIED AND IF BY CHANCE THE OCCASION SHOULD OCCUR THAT YOU SHOULD HAVE TO RE INSTALL THE MASTER PROGRAM INSTALLATION THE ORIGINAL ONE THAT IS CREATED MAY NOT FUNCTION PROPERLY. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 **************************************************************************** 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 ****** VERY IMPORTANT NOTES CONCERNING YOUR VBZAPPER PROGRAM ****** IMPORTANT NOTE: IF DURING THE INSTALLATION AFTER THE BATCH FILE HAS COPIED THE WINDOWS AND SYSTEM FILES AND YOUR SYSTEM HAS MS-DOS VERSION 6.2 OR HIGHER AND YOU GET THE FOLLOWING DOS ERROR MESSAGE THIS PROGRAM REQUIRES MICROSOFT WINDOWS OR UNABLE TO START WINDOWS DURING THE INSTALLATION PHASE OF THE PROGRAM YOU WILL THEN NEED TO RESTART MICROSOFT WINDOWS 3.1 AND AT THE RUN COMMAND FROM WINDOWS TYPE THE FOLLOWING IF INSTALLING THE PROGRAM FROM YOUR COMPUTERS A:\> DRIVE [ A:\INSTALLA.EXE ] OR IF INSTALLING FROM YOUR COMPUTERS B:\> DRIVE [ B:\INSTALLB.EXE ] THE PROGRAM WILL THEN BE FULLY INSTALLED. INPORTANT NOTE: YOU MUST HAVE THE ACCESS DLL FILE [ MSAJT200.DLL ] AS SUPPLIED BY MICROSOFT CORPORATION AND IT MUST BE LOCATED IN YOUR C:\WINDOWS\SYSTEM DIRECTORY FOR THIS PROGRAM TO FUNCTION. IF YOU ARE NOT ABLE TO LOCATE THIS FILE FROM ANY OF THE BBS SERVICES PLEASE CONTACT TAYLORED SOFTWARE FOR A COPY OF THIS FILE. IMPORTANT NOTE: YOU MUST BE SURE THAT THE FOLLOWING COMMAND LINE IS LOCATED IN YOUR COMPUTERS AUTOEXEC.BAT FILE: ** C:\DOS\SHARE.EXE ** IT IS REQUIRED AND MANDATORY TO LOAD AND RUN YOUR VBZAPPER PROGRAM AND ITS ASSOCIATED PROGRAM DATABASES. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 NOTE: YOU MUST HAVE YOUR WINDOWS AND WINDOWS SYSTEM DIRECTORIES LOCATED ON YOUR COMPUTER'S C:\ HARD DRIVE. IF THIS IS NOT THE CASE THEN YOU MUST MAKE THESE ARRANGEMENTS TO ACCOMPLISH THIS AND ANY STEPS NECESSARY MUST BE PREFORMED BEFORE THE PROGRAM CAN BE INSTALLED. NOTE YOU MUST INITIALIZE THE PROGRAMS FILES ON YOUR COMPUTER'S C:\ HARD DRIVE BUT WHEN THE SETUP PORTION OF THE PROGRAM IS LOADED YOU MAY INSTALL THE PROGRAM TO ANY OF THE HARD DRIVES THAT YOUR COMPUTER SUPPORTS 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 END OF THE VERY IMPORTANT NOTES FOR VBZAPPER **************************************************************************** Below is a list of TRANSMISSION files found for your unregistered copy of Your VBZAPPER program delivered on this diskette contains a set of preconstructed installation files can be contained on one 3 1/2" 1.44 MEG program master disk. It does contain all of the necessary files [ A LIST IS PROVIDED BELOW ] if it is properly downloaded or accessed by you. Then from and using the following instructions you will be able to easily and simply load your VBZAPPER program to your computer's C:\VBZAPPER directory. Here is a listing of the necessary files for the computer system not having MICROSOFT'S Visual Basic installed. This should be the diskette that you should have just received or accessed. The listing of files for a computer system with Visual Basic then follows the first listing. 1.) VBZAPUR.ZIP - The compressed file of all compressed program files. 2.) SETUPKIT.DLL - a WINDOWS DLL file for your windows system directory. 3.) UZ.EXE - The file uncompressor program. 4.) INSTALL.TXT - This text file a copy of which is loaded to your C:\VBZAPPER directory during program installation. 5.) INSTALLA.EXE - The MAIN INITIALIZATION file for the program used if you are loading from your computer's A:\> drive. 6.) INSTALLB.EXE - The MAIN INITIALIZATION file for the program used if you are loading from your computer's A:\> drive. 7.) VBRUN300.DLL - a WINDOWS DLL file for your windows system directory. 8.) INSTALL.BAT - The BATCH file used by the INSTALL program. 9.) STARTA.BAT - The BATCH file that you use to start the whole install process if you are installing the program from your computer's A:\. This is all you have to enter the program will do the rest. 10.) STARTB.BAT - The BATCH file that you use to start the whole install process if you are installing the program from your computer's B:\. This is all you have to enter the program will do the rest. 11.) VBZAPPUR.TXT - A general text file a copy of which is loaded to your C:\VBZAPPER directory during program installation. 12.) COLOR.EXE - An executable file used during the program installation. 13.) INSTALLA.PIF - The PROGRAM INFO file used by WINDOWS program. 14.) INSTALLB.PIF - The PROGRAM INFO file used by WINDOWS program. 15.) REGISTER.TXT - A text file a copy of which is loaded to your C:\VBZAPPER directory during program installation. 16.) LICENCE.TXT - A text file a copy of which is loaded to your C:\VBZAPPER directory during program installation. The main distribution file that you have downloaded is labeled as VBZAPUR.ZIP and it contains all of the individual compressed program files that are used by the installation portion of the program I.E. either INSTALLA.EXE or INSTALLB.EXE including SETUP.EXE the setup file that is used by windows to install your VBZAPPER program. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 HERE ARE THE SIMPLE AND EASY TO FOLLOW BASICS TO GET VBZAPPER INSTALLED 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 In order that you may initiate the full installation of the VBZAPPER program and to initialize all of the installation files that are contained In the transmission files for your VBZAPPUR program and to get the program fully installed the only steps required by you are as follows:. If you are installing the program from you computer's A:>\ drive insert the diskette into your A:>\ drive and type STARTA at the A:>\ DOS prompt or if you are installing the program from you computer's B:>\ drive insert the diskette into your B:>\ drive and type STARTB at the B:>\ DOS prompt and the program will begin loading via dos the windows system files required to begin the initialization mode and then finally the installation mode of the program. After typing either of the above and at the first screen just press a key or if you decide not to install the program press CTL and BREAK at the same time to exit the initial initialization of the program files. The Program will if you press any key take over from there and when the copying of the above files is complete will load windows and the initialization program. After the VBZAPPER program initialization screen is displayed by windows you will be required to decide if you want to continue the installation. If So click continue or if not click exit. If you click continue the program will initialize all of the programs files. So just sit back and wait a few minutes. Then the programs SETUP screen will be displayed. Click continue or exit which ever the case may be in order to complete the full installation of your VBZAPPER WINDOWS DUPLICATE FILE LOCATOR AND DATABASE LIBRARY AND FILE MANAGER PROGRAM. Just a note here if you decide not to finish the installation just remove the diskette after the setup screen is displayed [ THIS IS DISPLAYED ON THE LAST STEP OF THE PROGRAMS INSTALLATION AND ALL YOU WOULD NEED TO DO WOULD BE TO CLICK EXIT SETUP] When you decide to install the program you may do so by simply preforming the steps as outlined below and as follows: [NOTE: IF YOU ARE FULLY INSTALLING THE PROGRAM SKIP THE FOLLOWING] 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 NOTES FOR FUTURE PROGRAM INSTALLATION 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 When you do decide to install your VBZAPPER program the only steps necessary are to access windows and enter the following exact command from the RUN menu box of the files menu of your program manager and depending on if the floppy drive you are you are going to be installing your VBZAPPER program from your computer is a:\> or B;\> drive as the proper case may be. A:\SETUP.EXE B:\SETUP.EXE The program will then be fully installed and the setup program will then create the program group and all of the necessary program icons that are required to fully access and run all of the programs contained in your UNREGISTERED copy of VBZAPPER FOR WINDOWS 3.1. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 END OF NOTES FOR FUTURE PROGRAM INSTALLATION 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 NOTE: DO NOT be concerned near the end of the installation when the windows 3.1 dynamic linked library system files are being written to that directory and the floppy drive disk looks as if it is reading but it looks as if no writing is being preformed to the hard drive. This is normal when installing these type of files. The total installation should take approximately 4-6 min. on a 486 machine. After the program installation is completed you are then returned to the windows program manager. Note: WHEN YOU EXIT THE PROGRAM MANAGER TO DOS YOU WILL SEE THE MESSAGE [ "INSERT THE DISK WITH THE BATCH FILE AND PRESS A KEY".] Do not worry just press the CTRL-BRK keys both at the same time and then the message ["TERMINATE THE BATCH JOB?"] WILL APPEAR. JUST ANSWER YES AND THE DOS PROMPT WILL APPEAR. IT' S THAT SIMPLE AND EASY JUST LIKE THE PROGRAM One more note as stated above I would heartily recommend that you make a backup copy of the program installation files before you remove the VBZAPPER program installation diskette and store them in a cool dry place. It Never hurts to have two [2] copies of a the installation program. Please note once the program is installed these two diskettes will be the only diskettes that will function if you need to re install the program. See the notes that follow on preforming this. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 PROGRAM MASTER DISKETTE BACKUP PROCEDURE 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 After the program installation is complete please make a backup copy of the program master installation disk that was created and that you have just used to install your VBZAPPER program. This is for your own protection. You may do this by using the DOS (COPY OR DISKCOPY) command from the DOS Prompt. At the DOS Prompt type this as follows: A:\> copy *.* B:\> OR A:\> diskcopy *.* A:\> if you have a single disk drive. OR B:\> copy *.* A:\> The program will then be fully installed and the setup program will then create the program group and all of the necessary program icons that are required to fully access and run all of the programs contained in your UNREGISTERED copy of VBZAPPER FOR WINDOWS 3.1. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 END OF THE PROGRAM MASTER DISKETTE BACKUP PROCEDURES 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Again thank you very much for trying our product and I hope that you will see the great value that it can offer you and that you will treasure it enough to register your copy with us. Please see the register help file accessed from the main program help menu if you do so wish to register your SHAREWARE copy of the program and receive the full and updated registered version of the VBZAPPER FOR WINDOWS 3.1 program. Also please review all of the program HELP AND TEXT files contained on your hard drive via the main help menu or by the use of any text viewer after the installation is complete. Please see the BROWSE.DOC for full information on how to use BROWSE.COM [ the text file browser ]. Jonathan B. Taylor 8504 Van Pelt Dr. Dallas, Texas 75228 PHONE: 1-214-328-4276 MONDAY - FRIDAY 8:00 AM - 5:00 PM 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 P.S. AGAIN MANY THANKS FOR USING AND TRYING OUR PRODUCT. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 IF I MAY BE OF ANY FURTHER SERVICE PLEASE DON'T HESITATE TO CALL OR WRITE ME. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 VBZAPPER is a registered trademark of Taylored Software. All programs on this disk are Copyrighted (C) 1996 by Taylored Software.